Alpha-technologies Security Bar Field For UPE-3, UPE-6, UPE-M3, UPE-M Manuale Utente Scaricare il pdf

Power

Tools and Materials Required

• Hand drill

Center punch

Pop rivet tool with 5/32" nose piece

4-foot level

• #20 drill bit

• Tape measure

Masking tape

Pencil

Utility knife

Vacuum to remove metal shavings from cabinet interior

Lock, see Fig. 1 for dimensions

•

Material List, Security Bar Kit

UPE-3, UPE-6, UPE-M3, UPE-M6, PN and CE Series

Alpha P/N Description Qty

605-348-J2-002 Side Bracket 4

605-346-J2-003 Lock Bracket 2

605-345-R2-001 Security Bar 2

636-005-12 Rivets 12

633-294-12 Washers 12

Security Bar Field Installation InstructionsFiel

For UPE-3, UPE-6, UPE-M3, UPE-M6, PN Series and CE Series Enclosures

Each security bar kit contains the parts and accessories needed to secure one enclosure door. Enclosures with both a front and back

door, require two kits. Detailed placement speciﬁ cations for each supported enclosure are in the Security Bar Field Installation Manual

(Search for P/N 745-847-C1-001) available at www.alpha.com.

Installation

The installation outlined below applies to each of the

supported enclosures. On all enclosures you must install

side brackets and lock brackets. The side brackets hold the

security bar, and the lock brackets hold the security lock.

See Figs. 4 and 5.

If needed, detailed placement speciﬁ cations for each

supported enclosure are in the Security Bar Field

Installation Manual (Alpha P/N 745-847-C1-001) available

at www.alpha.com.

Where:

A= 5/16"

B= 3/4"

C= 2 1/2"

Fig. 1

Using a 4-ft level and a pencil, mark the front of

the enclosure where you want to place the top side

brackets and bar. See recommended placement

speciﬁ cations available at www.alpha.com (P/N 745-

847-C1-001). See Fig. 2.

Measure from the sides and mark the holes with a

center punch. These will be the top holes used by

the side brackets.

Remove the door.

Place cardboard behind the door jam to protect

the electronic equipment from the metal shavings

created during drilling. The carboard deﬂ ects

the shavings, and should be removed when the

installation is complete.

Drill the holes using a #20 drill bit. See Fig 3.

Fig. 2

Mark guide lines

to aid in placing

the top side

brackets and

security bar.

GuideLine

Drill holes

Fig. 3

A gas line runs behind the door jam on the 5K generator.

Turn off the gas prior to installing the security bar. Be

careful not to puncture or damage the line.

WARNING!

Page 1 of 2

1 2

Sommario

Pagina 1 - WARNING!

Power®Tools and Materials Required• Hand drillCenter punchPop rivet tool with 5/32" nose piece4-foot level• #20 drill bit• Tape measureMasking t

Pagina 2 - Total Power Solutions

Argus Cordex™ CXRC 2RU SeriesArgus Cordex™ CXRC 4RU Series Total Power SolutionsAlpha Technologies reserves the right to make changes to the products

Commenti su questo manuale

Nessun commento

Alpha-technologies Security Bar Field For UPE-3, UPE-6, UPE-M3, UPE-M Manuale Utente

Navigare online o scaricare Manuale Utente per Apparecchiature Alpha-technologies Security Bar Field For UPE-3, UPE-6, UPE-M3, UPE-M. Alpha Technologies Security Bar Field For UPE-3, UPE-6, UPE-M3, UPE-M6, PN Series and CE Series User Manual [de] Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Apparecchiature Alpha-technologies Security Bar Field For UPE-3, UPE-6, UPE-M3, UPE-M